Hello! Welcome to Shenzhen Keyou PCB Co., Ltd!

Home > TAGS > PCB

The info about "PCB"

Published by Shenzhen Keyou PCB Co., Ltd2019-09-02

Frequently Asked Questions about PCB Proofing Design

1.The bonding pad overlap: The overlap of the pads (except for the surface mount pads) means the overlap of the holes. In the drilling process, the drill bit is broken due to multiple holes in one...

Do you like ?

Read More

Published by Shenzhen Keyou PCB Co., Ltd2019-09-06

Ten Points About PCB Jigsaw

1. The outer frame (clamping edge) of the PCB panel should adopt a closed-loop design to ensure that the PCB panel will not be deformed after being fixed on the fixture; 2, PCB board width ≤ 260mm ...

Do you like ?

Read More

Published by Shenzhen Keyou PCB Co., Ltd2019-09-18

Common Reasons for Copper in PCB Factory

First, the reason for the laminate process Under normal circumstances, as long as the laminate is hot pressed for more than 30 minutes, the copper foil and the prepreg are basically completely comb...

Do you like ?

Read More

Published by Shenzhen Keyou PCB Co., Ltd2019-10-14

PCB Design 'How to Put' and 'How to Connect'

The PCB design seems to be complicated. It is necessary to consider the direction of various signals and the transmission of energy. The distress caused by interference and heat is also always present...

Do you like ?

Read More

Published by Shenzhen Keyou PCB Co., Ltd2019-10-16

The Difference Between PCB and PCBA

Believe that many people are familiar with PCB circuit boards, which may be heard frequently in daily life, but may not be familiar with PCBA, and may even be confused with PCB. So what is a PCB? H...

Do you like ?

Read More

Published by Shenzhen Keyou PCB Co., Ltd2019-10-16

PCB circuit board heat dissipation method

For electronic equipment, a certain amount of heat is generated during operation, so that the internal temperature of the equipment rises rapidly. If the heat is not dissipated in time, the equipment ...

Do you like ?

Read More